Nationwide Toll Free 1-800-338-1382
Monday through Friday
5:00am to 5:00pm PST
Monday through Friday
5:00am to 5:00pm PST
Languages
We have shipping points ALL OVER the United States and Canada!
We are headquartered in Portland, OR with many shipping locations
on the East Coast, Midwest, the South as well as the West Coast! Call 1-800-338-1382
Floor Level Loaders
Presto Lifts - Floor Level Loaders
|
||||||
|
||||||
Presto Floor Level Loaders are the ultimate in manual palletizers.
The Presto Floor Load Level Loaders improves worker productivity and reduces fatigue. Its platform lowers to floor height so that pallets can be placed and removed using a hand pallet truck.
In loading operations, a pallet is placed on the platform and the platform is raised by hydraulic power to its full UP position. As goods are loaded onto the pallet, the platform is lowered so that each succeeding tier of goods can be loaded at the same height.
When unloading pallets, the platform starts at its lowest height and is progressively raised so that each succeeding tier of goods can be removed at the same height.
The Presto Floor Level Loader can be accessed from all four sides. Presto Units are equipped with a photoelectric toe guard which will stop downward travel if the beam is interrupted. The units have capacities up to 4000 lbs., making them suitable for most pallet loads that can be moved with hand equipment.
Because it lowers to the floor it can be fed with a hand pallet truck. The operator can precisely position the load to the most convenient and comfortable working height at the touch of a button. The extremely narrow side panels allow loads to be accessed with virtually no reachover.
Presto Lifts Floor Level Loaders Features:
• Lowers to floor height so load can be loaded on or off with a hand pallet truck.
• Foot switch allows operator to adjust height of pallet for loading/unloading at the most convenient working height with minimum reaching or lifting.
• Easy and safe pallet loading with narrow side panels to provide operator protection.
• Easily moved with a hand pallet jack.
• Standard voltage is 115/1/60 Other voltages are available.
• Any of the following controls may be specified at no additional cost: NEMA 1, up/down, footswitch with cover and 10-foot control cord or NEMA 4, up/down, hand held pushbutton with magnet and 10-foot control cord.
• All standard P4s are shipped with the following: Internally mounted power unit and reservoir filled with hydraulic oil.
• Photoelectric toeguard.
• Standard control voltage is 115/1/60.
• 10-foot control cord pre-wired.
Can't find what you are looking for, Give us a call. Material Flow is here to help you. 800-338-1382
The Presto Floor Load Level Loaders improves worker productivity and reduces fatigue. Its platform lowers to floor height so that pallets can be placed and removed using a hand pallet truck.
In loading operations, a pallet is placed on the platform and the platform is raised by hydraulic power to its full UP position. As goods are loaded onto the pallet, the platform is lowered so that each succeeding tier of goods can be loaded at the same height.
When unloading pallets, the platform starts at its lowest height and is progressively raised so that each succeeding tier of goods can be removed at the same height.
The Presto Floor Level Loader can be accessed from all four sides. Presto Units are equipped with a photoelectric toe guard which will stop downward travel if the beam is interrupted. The units have capacities up to 4000 lbs., making them suitable for most pallet loads that can be moved with hand equipment.
Because it lowers to the floor it can be fed with a hand pallet truck. The operator can precisely position the load to the most convenient and comfortable working height at the touch of a button. The extremely narrow side panels allow loads to be accessed with virtually no reachover.
Presto Lifts Floor Level Loaders Features:
• Lowers to floor height so load can be loaded on or off with a hand pallet truck.
• Foot switch allows operator to adjust height of pallet for loading/unloading at the most convenient working height with minimum reaching or lifting.
• Easy and safe pallet loading with narrow side panels to provide operator protection.
• Easily moved with a hand pallet jack.
• Standard voltage is 115/1/60 Other voltages are available.
• Any of the following controls may be specified at no additional cost: NEMA 1, up/down, footswitch with cover and 10-foot control cord or NEMA 4, up/down, hand held pushbutton with magnet and 10-foot control cord.
• All standard P4s are shipped with the following: Internally mounted power unit and reservoir filled with hydraulic oil.
• Photoelectric toeguard.
• Standard control voltage is 115/1/60.
• 10-foot control cord pre-wired.
Can't find what you are looking for, Give us a call. Material Flow is here to help you. 800-338-1382
| Presto Lifts Floor Level Loaders Part Details | |||||||||||
| Model No. | Load Capacity | Raised/Lowered Height | Platform Size | Overall Dimensions | Standard HP | Rise Time | Standard Voltage | Weight | Price Ea. | Rate Quote (?) | Purchase Online (?) |
| P4-25-4448 | 2500 lbs. | 28" / 3/8" | 44" x 48" | 51" x 61" | 1 | 22 | 115/1/60 | 1485 lbs. | $4976.10 |
|
|
| P4-25-5248 | 2500 lbs. | 28" / 3/8" | 52" x 48" | 59" x 61" | 1 | 22 | 115/1/60 | 1620 lbs. | $5441.70 |
|
|
| P4-40-4448 | 4000 lbs. | 28" / 3/8" | 44" x 48" | 51" x 61" | 1 | 30 | 115/1/60 | 1650 lbs. | $7211.95 |
|
|
| P4-40-5248 | 4000 lbs. | 28" / 3/8" | 52" x 48" | 59" x 61" | 1 | 30 | 115/1/60 | 1800 lbs. | $7774.55 |
|
|
| F.O.B. Midwest Facility | |||||||||||
Optional items for Presto Lifts - Floor Level Loaders
Hydraulic Lift and Tilt Mechanical Options
| Presto Lifts Hydraulic Lift and Tilt Mechanical Options Part Details | ||||
| Model No. | Description | Price Ea. | Rate Quote (?) | Purchase Online (?) |
| OVERSIZE-PLATFORMS | Oversized Platform - platforms can be increased in width and length up to additional 24". Side and end load capacities are derated 2 percent per inch of increase and oversized models must be lagged to the floor. | $320.00 | |
|
| PLATFORM-BEVELED | Platform with Beveled Edges - welded at 30° angles, increases the standard platform by 4" on all sides. | CALL | |
Not Available |
| TOE-GUARD | Electro-Mechanical Toe Guard - mounted to the under side of the platform, adds 4" on all sides. | CALL | |
Not Available |
| PIT-MOUNT | Pit Mounted Units - for ground level applications require either a Platform with Beveled Edges or Electro-Mechanical Toe Guards.Lifting Eyes required for installation and External Motor recommended | CALL | |
Not Available |
| LIFTING-EYES | Lifting Eyes - provided for installation and transporting of unit with a sling or lifting chain. | $170.00 | |
|
| BALL-TRANSFER-TOP | Ball Transfer Tops - for multi directional movement of work loads, available for all load weights. Adds 2 3/4" to overall lowered height. | CALL | |
Not Available |
| ACCORDION-BELLOWS | Accordion (Bellow) Skirts - designed to cover to scissor leg assembly of the lift table. XL 24 Series, XL 36 Series, XL 48 Series and other Models | CALL | |
Not Available |
| V-GROOVE-WHEELS | V Grooved Wheels - 5" steel wheels for Transportable Units only, sold per pair. | CALL | |
Not Available |
| FORK-POCKETS | Fork Pockets - used for moving scissor lifts between work stations. | CALL | |
Not Available |
| TURNTABLES | Turntables - constructed of 1/2" steel plate andmounted on a 24" x 24" base plate equipped with a pivot pincaptured bearing and four 1 3/4 cam followers. Base hasmounting holes for lagging unit to table top, floor stand, | CALL | |
Not Available |
| DETENT-STOPS | Detent Stops - spring activated stops for a Turntable, standard stops positioned at 90° increments. | CALL | |
Not Available |
| CONVEYOR-TOP | Conveyor Top - mounted to the lift table platformthese 1.9” diameter rollers on 3” center have a1000 lb capacity per linear foot. Adds 4" to overall height. | CALL | |
Not Available |
| CONVEYOR-SIDES | Conveyor Sides - used to retain product onconveyor tops, recommend on all Transportable Units. | CALL | |
Not Available |
| TOP-MATERIAL | Optional Top Material - for special handling of loads,v tops, aluminum material, stainless steel,diamond plate, etc. | CALL | |
Not Available |
| SUPER-CYCLE | Super Cycle (XL and Wide Base units only.) For high cycle applications consult Material Flow for pricing. Components in base frames have been designed for high volume repetitive lifting applications. | CALL | |
Not Available |
| F.O.B. Midwest | ||||
Hydraulic Lift and Tilt Hydraulic Options
| Presto Lifts Hydraulic Lift and Tilt Hydraulic Options Part Details | ||||
| Model No. | Description | Price Ea. | Rate Quote (?) | Purchase Online (?) |
| EXTERNAL-REMOTE-POWER | External / Remote Power Units - all three phase unitsinclude transformer for low voltage control, 6’ of hosea nd a mounting stand. | $125.00 | |
|
| 1HP-SINGLE-PHASE | 1 HP Single Phase - (115-230v/1/60) | CALL | |
Not Available |
| CONVERT-1 | Convert 1 HP 115 V single phase to1-1/2 HP Three Phase - (208, 230 or 460V/3/60) with 1 GPM pump | $150.00 | |
|
| CONVERT-2 | Convert 1 HP 115 V single phase to1-1/2 HP Three Phase - (208, 230 or 460V/3/60) with 2 GPM pump | CALL | |
Not Available |
| EXTERNAL-5HP | External 5 HP Three Phase - (208, 230, or 460/3/60) | $730.00 | |
|
| 3-PHASE | 1-1/2 HP Three Phase - (575/3/60) | $150.00 | |
|
| 3HP-5HP | 3 HP and 5 HP motor/pump units available, price on request. | CALL | |
Not Available |
| AIR-MOTOR | Air Motors | CALL | |
Not Available |
| FIRE-RESISTANT | Fire Resistant Hydraulic Fluid - water-glycol fluids arefire resistant, non-explosive and non-toxic. Approved byFactory Mutual Insurance Engineering Laboratories | $180.00 | |
|
| LOW-TEMP | Fire Resistant Hydraulic Fluid - water-glycol fluids arefire resistant, non-explosive and non-toxic. Approved byFactory Mutual Insurance Engineering Laboratories | $365.00 | |
|
| VELOCITY-FUSE | Velocity Fuse:A safety feature to lock unit in positionin the event of a total hydraulic pressure loss. | CALL | |
Not Available |
| F.O.B. Midwest | ||||
Hydraulic Lift and Tilt Electrical Options
| Presto Lifts Hydraulic Lift and Tilt Electrical Options Part Details | ||||
| Model No. | Description | Price Ea. | Rate Quote (?) | Purchase Online (?) |
| NEMA-12 | Hand Operated NEMA 12 - control withan 8' cord is standard. | CALL | |
Not Available |
| NEMA-4 | Hand Operated NEMA 4 - weather resistantcontrol with an 8' cord.Substituted for NEMA 12. Additional controller available | $315.00 | |
|
| NEMA-1 | NEMA -1 Foot Control - foot operated controlSubstituted for NEMA 12 Hand Control. Additional controller available | CALL | |
Not Available |
| NEMA-4HH | Hand Held NEMA 4 with 20' Coil CordSubstituted for NEMA 12 Hand ControlAdditional controllers available | $360.00 | |
|
| WALL-MOUNTED-CONTROL | Wall Mounted Control | CALL | |
Not Available |
| LIMIT-SWITCH | Limit Switch - Limits the vertical travel of the scissor lift. | $210.00 | |
|
| PEDESTAL-MOUNT | Pedestal Mounted Controls - NEMA 12 controllermounted on a rugged steel stand with momentary push buttons | $495.00 | |
|
| F.O.B. Midwest | ||||